LAMIPLEX BrowXenna® Express treatment kit
is an innovative product designed for express brow and lash lamination. It is specifically formulated to create and maintain the desired shape of brows and lashes, while increasing their volume and promoting restoration simultaneously.

Eyebrow Lamination Procedure:

Preparation:

1. Cleanse the eyebrows using BrowXenna® Deep Cleansing Foam Shampoo. Rinse off with water.
2. Gently brush the eyebrows in the desired direction.

Brow Restructuring:

1. Apply Step 1 Lift evenly to the brows using a synthetic brush or applicator stick. Please note that a noticeable odor from the Step 1 Lift solution is normal.
2. After the recommended application time, remove Step 1 Lift from the eyebrows with a dry cotton pad in the direction of hair growth.

Application time:

1. For thick, coarse, and gray brows: use Step 1 Lift as it is. The recommended application time is 3-6 minutes.
2. For medium-thick hairs: mix Step 1 Lift and P Plex Recovery in a ratio ranging from 4:1 to 1:1, depending on the hair’s condition. The recommended application time is 5-7 minutes.
3. For porous , dry brows: mix Step 1 Lift and P Plex Recovery in a 1:1 ratio. The recommended application time is 4-6 minutes.
4. It is not recommended to perform the lamination procedure on severely damaged or recently lightened eyebrows. Instead, it is advised to provide deep care using the P Plex Recovery formula.

Shape Fixation:

1. Apply Step 2 Fix evenly to all the hairs.
2. Gently brush the eyebrows, styling the hair in your desired direction and shape. It’s important not to change the direction of hair growth by more than 45 degrees from their natural position.
3. The recommended application time is the same as the application time for Step 1 Lift.
4. Remove any residue of the product by using a damp cotton pad in the direction of hair growth.

Eyebrow Coloring:

1. Mix the 2.7% Cream Activator with the Oxygen J2 BrowXenna® eyebrow dye in a 1:1 ratio.
2. Apply the prepared coloring mixture to the eyebrows.
3. Add the Cream Diluter to prevent darkening during coloring.
4. Application time: 5-7 minutes.
5. Remove the dye with a damp cotton pad.
6. Allow the eyebrows to dry.

Restoration and care:

1. Apply a few drops of P (Plex Recovery) solution and evenly distribute it on the eyebrow hairs.
2. Do not rinse off the solution for 24 hours.

Home Care Recommendations:

• Avoid bathing, sauna and tanning for 24 hours after treatment.
• Use BrowXenna® SPA White and Green Mask treatment twice a week.
• Apply BOTEX-X or BOTEX-X concentrate with ceramides BrowXenna® daily.

Eyelash Lamination Lift Procedure:

Preparation:

1. Cleanse the lashes using BrowXenna® Eyebrow Deep Cleansing Shampoo Foam. Rinse with water.
2. Secure the desired size silicone lash lift rod on the upper eyelid.
3. Carefully distribute and secure the lashes on the rod using BrowXenna® Lamination adhesive.

Creating Lash Curl:

1. Apply Step 1 Lift solution to the lash curling area, leaving a gap of 0.5-1 mm from the lash roots. Please note that a noticeable odor from the Step 1 Lift solution is normal.
2. After the recommended processing time, gently remove the solution from the lashes using a damp cotton swab.

Application time:

For thick and coarse lashes:

• Use Step 1 Lift solution as is.
• Processing time: 3-6 minutes.

For lashes of medium thickness, natural, and glossy:

• Mix Step 1 Lift solution and P Plex Recovery in a ratio of 4:1 to 1:1, depending on the condition of the lashes.
• Processing time: 4-6 minutes.

For porous lashes that have undergone previous chemical treatments:

• Mix Step 1 Lift solution and P Plex Recovery in a 1:1 ratio.
• Processing time: 3-6 minutes.

Important! P Plex Recovery solution slows down the process of altering the hair structure, hence the increased processing time.

Lash Fixation:

1. Apply Step 2 Fix solution evenly to the lash curling area.
2. Application time: same as the application time for Step 1 Lift solution.
3. Use a damp cotton swab to remove any residue in the direction of hair growth.

Lash Tinting:

1. Mix 2.7% Cream Activator with Oxygen J2 BrowXenna® lash dye in a 1:1 ratio.
2. Apply the dye mixture to the lashes.
3. Application time: 5-7 minutes.
4. Remove the dye with a damp cotton pad.

Care and Restoration:

1. Apply a few drops of P (Plex Recovery) solution and distribute it evenly over the lashes.
2. Do not rinse off the solution for 24 hours.

Home Care Recommendations:

1. Avoid visiting saunas, steam rooms, and tanning beds within 24 hours after the procedure.
2. It is important to prevent any mechanical disruption to the lash curl, so it is recommended to sleep on your back during the first day.
3. Apply BOTEX-X or BrowXenna® ceramide-enriched BOTEX-X concentrate daily.

P Plex Recovery is a unique formula designed for the restoration and protection of lashes and brows during and after chemical procedures. It actively restores the internal structure of the hair, providing elasticity and flexibility. It also makes the hair denser, smoother, more manageable, and shiny. This product has a cumulative effect.

It reduces the aggressive effects of chemical procedures such as:

1. Tinting: Mix it with any brow and lash dye in a ratio of 8:1.
2. Bleaching: Mix it with a lightening agent in a ratio of 8:1.

P Plex Recovery creates a protective membrane and restores the keratin structure.

Contraindications:

1. Individual intolerance to the product’s components.
2. Open wounds and skin damage.
3. Pregnancy and breastfeeding.
4. Chronic skin conditions.

It is recommended to perform a sensitivity test before use.

WARNING!

For professional use only. Keep out of reach of children. Avoid contact with eyes and mucous membranes. In case of eye contact, rinse thoroughly with water and seek medical attention.

The kit is designed for a total of 30 procedures.

pH Level: 6.0-6.5